ABB DSE201MB50AC30 DSE201MB50AC30 RCBO
Model:DSE201MB50AC30
ABB DSE201MB50AC30 DSE201MB50AC30 RCBO
Model:DSE201MB50AC30
-
£47.99 Inc VAT ( FREE UK Delivery On Orders Over £150* )
£39.99 Ex VAT ( FREE UK Delivery On Orders Over £150* )
Product: In Stock
DSE201 is a 1P+N residual current circuit breaker with overcurrent protection (RCBO) in one module for the protection against short-circuit currents, overload, earth fault currents, indirect contacts, additional protection against direct contacts (30 mA versions). DSE201 is equipped with supply neutral wire and functional earth wire.
Technical
- Standards:
- IEC 61009-1
IEC 61009-2-2
AS/NZS 61009-1
- Type of Residual Current:
- AC type
- Number of Poles:
- 1+N
- Number of Protected Poles:
- 1
- Rated Current (In):
- 40 A
- Rated Residual Current:
- 30 mA
- Rated Voltage (Ur):
- 230-240 V AC
- Rated Insulation Voltage (Ui):
- 500 V
- Overvoltage Category:
- III
- Pollution Degree:
- 2
- Test Voltage (Ut):
- 195 … 264 V
- Rated Frequency (f):
- 50...60 Hz
- Rated Short-Circuit Capacity (Icn):
- 6 kA
- Rated Residual Breaking Capacity (IΔm):
- 6 kA
- Primary Rated Impulse Withstand Voltage:
- 4 kV
- Dielectric Test Voltage:
- 2.5 kV
- Tripping Characteristic:
- B
- Energy Limiting Class:
- 3
- Housing Type:
- Insulation group II, RAL 7035
- Actuator Type:
- Toggle - Insulation group IIIA, black, sealable in ON-OFF positions
- Electrical Endurance:
- 10000 cycle
- Mechanical Endurance (Nendu):
- 20000 cycle
- Degree of Protection:
- Housing IP40
Terminals IP20
- Resistance to Shock acc. to IEC 60068-2-27:
- 30g / 2 shocks / 13 ms
- Resistance to Vibrations acc. to IEC 60068-2-6:
- 0.35mm or 5g - 20 cycles at 5…150…5 Hz without load
- Environmental Conditions:
- 28 cycles
with 55 °C / 90-96 %
and 25 °C / 95-100 %
- Reference Ambient Air Temperature:
- 30 °C
- Terminal Type:
- Screw Terminals
- Screw Terminal Type:
- Cage Terminal
- Connecting Capacity:
- Busbar 10 mm²
Rigid 25 …25 mm²
Flexible 25 …25 mm²
- Tightening Torque:
- Top 1.2 N·m
Bottom 2.8 N·m
- Mounting Type:
- on DIN rail EN 60715 (35 mm) by means of fast clip device in consumer unit Type A according to IEC 61439-1&3, BS EN 61439-1&3, in distribution board Type B according to IEC 61439-1&3, BS EN 61439-1&3.
- Power Supply Connection:
- Bottom
- Position of Neutral Terminals:
- Right
- Power Loss:
- 5.5 W
Environmental
- Ambient Air Temperature:
- Operation -25...55 °C
- RoHS Status:
- Following EU Directive 2011/65/EU
